Posted on

BeoLink Video

BeoLink Video

This kit is designed to allow a Beovision to be used in a link room but have full access to the sources, both audio and video, in the main room.

It attached to the link TV by means of a 7 pin cable and had no IR receiver as it utilised that in the TV. A separate RF cable was required between the RF modulator on the main room set and the link TV.

Posted on

BeoLink Converter

BeoLink Converter

This product allows the use of audio and video products with Audio Aux (Datalink) in a ML system.

It has a clever auto configuration feature which means it sets itself up depending on the connected units. Uses can be to connect an older audio set up such as a Beomaster 7000 to a newer video set up such as an Avant or a newer audio set up to an older TV.

It has a supplementary use in that it could be used with a Beocenter 2300/2500 which were fitted with MCL drivers to power an ML system. This requires the Converter to be of the newer type : 1161166. the older 1161466 is unable to perform this function.

Posted on

BeoVision Avant 75 NG

Bang & Olufsen BeoVision Avant 55

BeoVision Avant – Turning to you

Unfolding sound

BeoVison Avant is a celebration of movement.

An unforgettable fusion of Ultra High-Definition (4K) picture and iconic Bang & Olufsen sound, that unfolds before your very eyes.

Redefining TV sound

Precision tuned to Bang & Olufsen’s most exacting standard, BeoVision Avant redefines the audio impact a TV can deliver. The 3-channel speaker system harnesses three dedicated tweeters, three midrange units and

two powerful bass drivers. The result is a fusion of clarity and power that truly embodies Bang & Olufsen’s commitment to ultimate sound.

Contrasted imagery

BeoVision Avant combines local dimming across more than 8 million pixels, bringing out the tiniest details in the action. Experience the most extreme sports or action footage with crystal sharp, dynamic precision.

BeoVision Avant is a celebration of movement, designed to provide exceptional viewing and placement flexibility. It unfolds the experience and turns gracefully to your favourite viewing position. BeoVision Avant is a fusion of Ultra High-Definition (4K) picture and iconic Bang & Olufsen sound, redefining the audio impact a TV can deliver through a 3-channel speaker system with great speech intelligibility and power. BeoVision Avant takes control of any connected device from the BeoRemote One and provides one-touch access to the Bang & Olufsen experience.

Posted on

BeoVision Avant 85 NG

Bang & Olufsen BeoVision Avant 55

BeoVision Avant is a celebration of movement, designed to provide exceptional viewing and placement flexibility. It unfolds the experience and turns gracefully to your favourite viewing position. BeoVision Avant is a fusion of Ultra High-Definition (4K) picture and iconic Bang & Olufsen sound, redefining the audio impact a TV can deliver through a 3-channel speaker system with great speech intelligibility and power. BeoVision Avant takes control of any connected device from the BeoRemote One and provides one-touch access to the Bang & Olufsen experience.

BeoVision Avant – Turning to you

Unfolding sound

BeoVison Avant is a celebration of movement.

An unforgettable fusion of Ultra High-Definition (4K) picture and iconic Bang & Olufsen sound, that unfolds before your very eyes.

Redefining TV sound

Precision tuned to Bang & Olufsen’s most exacting standard, BeoVision Avant redefines the audio impact a TV can deliver. The 3-channel speaker system harnesses three dedicated tweeters, three midrange units and

two powerful bass drivers. The result is a fusion of clarity and power that truly embodies Bang & Olufsen’s commitment to ultimate sound.

Contrasted imagery

BeoVision Avant combines local dimming across more than 8 million pixels, bringing out the tiniest details in the action. Experience the most extreme sports or action footage with crystal sharp, dynamic precision.

Posted on

LC1 Light Controller

LC1 Light Controller

A part of the Bang & Olufsen complete home entertainment solution is the light control system which allows for the adjustment of light-settings of a single lamp, room or entire house with a Beolink® remote control.

You can also program local and global light-settings so that when you press ‘LIGHT’ and ‘1’ on the relevant remote control all the lights in the room adjust to their preset lux-settings which are stored in memory-location ‘1’. Nine local light settings can be stored with the dimming of each light unit being made individually.

Each light which should be included in the light programming must have an LC2 unit (the latest device) attached to them. It’s a small white, slim box with a dark glass ‘eye’ in the middle (see below). The ‘eye’ also operates as a tactile on/off switch – by touching it the light turns on or off; by keeping a finger on it the light dims upwards and downwards gradually.

The light-control units were also timer-programmable through two-way communication with the audio master (Beosystem or Beocenter) acting as the timer-host. In this way you could set the lights to dim when, for example your favourite TV-series began and the Beovision TV turned on! Unfortunately, since the demise of two-way communication in the mid-1990s this is no longer possible.

LC1 Light control module (1989-1992)

With the LC1 light control unit it became possible to regulate lighting levels and distribution using a Beolink 1000 terminal. The Mk3a Beolink 1000 was the first terminal to include a ‘Light’ key, and this, in conjunction with the volume keys, set the light level. Up to nine LC1 light controls could be used in one room, using the number keys on the Beolink 1000. LC1 light controls could also be preset at a number of different intensities, so that different ‘light pictures’ could be called up quickly and easily. The LC1 also had a sensi-touch area on its top surface in order that the connected light could be switched on and off manually.

Other remote control terminals that controlled the LC1 were Beolink 5000, 7000 and Beo4. Master Control Panels 5000, 5500 and 6500 did not include a light function.

Posted on

BeoLink Active

BeoLink Active

This comprises a control box, an IR receiver and a mains lead.

This allowed the connection of active BeoLab speakers which would then have independent control of volume and tone settings. Both audio and video sources could be selected and there was also the option of using the Beolink receiver to enable the Timer, alter the volume and enable play or initiate Stand By.

Posted on

BeoVision MX 1500

BeoVision MX 1500

Beovision MX1500 was a portable, remote controlled colour TV. It used a newly-developed 39cm flat-square picture tube and the special contrast screen ensured superior picture quality lifelike colours and the sharpest contrast – even in broad daylight. The MX1500 was ideal as a personal TV which could be used anywhere or as a TV set for a family which didn’t watch much television. It was great for use as a second set or as a TV which was moved from room to room. You could just take hold of the built-in recessed handle and move the 12,5 kg set around with you. Even the viewing angle could be adjusted to suit your own personal preferences; Beovision 1500 was designed so that it could be tilted when placed low down on the floor for example.

It came in four colours: bright red for the colourful, high-contrast home; elegant white as either a neutral or a highlight; distinguished silver-grey to radiate calm; and black to fit in almost anywhere.

Because of its more modest size, this great little performer didn’t have all the features of its big brother, Beovision MX3000.

Features:
Flat square picture tube – produced pictures in studio quality

Contrast screen – reduced effects of surrounding light and ensured clear conditions, even in broad daylight

Built-in support offered a perfect angle of viewing when Beovision 1500 was placed low… on the floor, for instance

35 channels for preset stations – the built-in memory guaranteed you favourite channel was always there on demand

Remote controlled channel tuning – one touch of the Beolink 1000 button and you could delegate search and tuning functions to the world of electronics

Full tone mono loudspeakers based on Bang & Olufsen’s many years of experience with small, compact loudspeakers. 2 watts sine power output

Optional built-in Teletext decoder (available as a separate option)

Clear and stable picture from PCs and TV games

Ready for cable TV

Front panel display made it easy to adjust sound and picture and clearly indicated which channel had been selected

Emergency operation – if Beolink 1000 had been misplaced, there was an on/off button on the set itself. The same button could be used to programme the channels if the terminal was not at hand

Connections for video and tape recorder, earphones, PC, TV games and decoder

Posted on

BeoVision MX 2000

BeoVision MX 2000

Beovision MX2000 was a completely different kind of TV. In terms of design, colour and uses it was a departure from tradition. Beovision MX2000 was one of the most stunning and versatile television sets ever created.

Technically the TV was new at the time of its release because of its stereo sound, automatic search for channels and its remote-control. Visually the TV was remarkable because of its contrast screen which reduced the inconvenience of incident light and left the TV dark and discrete when turned off. When turned on the TV was reduced to its function – that of displaying a picture. David Lewis’s design on the MX2000 was detailed and highly aesthetic which made the TV look good from all angles. Because of the pyramidal shape the TV was suitable for placement in corners. The set was a 50cm stereo colour TV that you could literally take with you. Bang & Olufsen’s special VisionClear system ensured that lifelike colours and the best contrast conditions were always obtained… both night and day. And Beovision MX2000 had so many different positioning possibilities that the perfect sound and picture quality could be taken advantage of and enjoyed to the full. Beovision MX2000 was controlled by the remote control Video Terminal. The TV could work with any video tape recorder but the Beocord VHS 82 was a specially designed video recorder that was created to harmonize with the MX2000. Not just when it came to operation but also in design and colour. And the complete, remote-controlled video system could deliver much more than perfect pictures with sound. Beocord VHS 82 was also a stereo audio tape recorder that offered up to eight hours recording on one tape, with hi-fi stereo quality playback. The choice of colour for MX2000 was a matter of personal taste, and style. The choice was yours: rich red for a home abounding in colour and striking contrasts; elegant white; distinguished metallic grey; or black to go with most colour schemes. Beovision MX2000 wasn’t portable TV but it was easy to move around. Grab hold of the built-in handle and Beovision MX2000 went with you. The TV could be put most anywhere. On the floor, shelf, table, window sill and so on. The built-in support on the base even made it possible to tilt the TV backwards. This ensured for a natural, perfect viewing angle when placed low on a floor. The set could of course be put on the practical TV stand which was equipped with solid, easy rolling wheels. And the special mounting platform made it possible to swivel the TV from side to side. The complete remote controlled – Video Terminal – video system could be grouped on a video stand to create one space-saving piece of furniture. It too had solid, easy rolling wheels and allowed the TV to be swivelled from side to side. Beovision MX2000 won the ID Award in 1986. Beovision MX2000 could be both manually operated or operated by remote control. The concealed panel in the top of the TV adjusted all sound and picture functions. But once adjustments to volume, sound, balance, bass, treble, contrast, colour balance and brightness had been made according to the viewer’s wishes and surrounding conditions, the Terminal took over day-to-day usage. Fine-tuning of TV channels, which is generally a once-only task, and stereo width-adjustment were also part of manual control. It was also possible of course, to change over stations and turn on and off the set with the controls on the panel. “Beovision MX2000 gives the impression of lightness and extended freedom of positioning. Now, all of a sudden, the TV could be positioned anywhere – even in the middle of a room” The MX concept began as Beovision M20 in a modest grey cabinet and without a contrast screen. It sort of heralded what a monitor television by Bang & Olufsen might look like. Basically, a monitor is just a screen with a box around it. In the mid-1980s, the emphasis was on the picture and efforts to achieve a monitor look.

The clean screen.
Bang & Olufsen elected to make the television slim by placing the loudspeakers below the screen. This broke with the practice of several decades of placing the loudspeakers at the sides of the picture tube. The latest MX 8000 model incorporates active loudspeakers and the sound has become even better. Previously, and with its Beovision MX 5000, Bang & Olufsen introduced yet another element that, so far, is unique to he company: a motorised base. Now the television turned to face the viewer – not vice versa. Bang & Olufsen had a lot of difficulty explaining Bang & Olufsen’s picture quality, which comprises many individual factors that have been optimised over the years. In1985-86, the decision was made to combine everything that came under the term
“picture quality” into a single concept – VisionClear.
MX2000 was born out of the ideas for the Beovision M20 and was further equipped with VisionClear, including a contrast screen. The MX family became extremely popular and remains so (it is still being produced and sold). Designer David Lewis created a cabinet that fitted around the back of the picture tube, thereby achieving the purely psychological effect of making the picture tube appear smaller than it actually is. Beovision MX 2000 gave the impression of lightness and extended freedom of positioning. Now, all of a sudden, the TV could be positioned anywhere – even in the middle of the room. Bang & Olufsen’s first television in the the US market was a variant, Beovision MX 5000 US. But, because of sales factors and market conditions at the time, it was not a great success. The many features of the Beovision MX2000 were market leaders in their day; however, many of these features are still included, even today, in Bang & Olufsen television sets:
In-line black matrix picture tube.
Part of the VisionClear system which reduces the chance of unintentional mixing of picture colours and ensures perfect pictures throughout the life of the set
Automatic Cut-Off.
Also part of the VisionClear system. This is an electronic circuit that regulates colour balance 50 times a second. A patented Bang & Olufsen circuit that ensures lifelike colours… automatically, and constantly
Contrast screen.
The most visually stunning part of the VisionClear system. At the time of the MX2000 introduction, this was a newly-developed Bang & Olufsen screen that ‘tones down’ the effect of bright light. It ensures that colours are bright and that there is optimum contrast – even in daylight. The rectangular contrast screen provides a wider picture and thereby creates the impression of watching a larger screen Remote-controlled station tuning based on digital technology. Search and tuning of up to 100 channels was carried out automatically after a couple of touches on the Terminal 32 permanent channels and 3 AV channels. Built-in memory which ensured that your favourite channels were right at hand. A touch of one button was all that was needed – and still is right up to the 21st century! Fine tuning: a help feature that was activated manually on the MX2000 when reception conditions were poor or if a TV signal’s frequency was non-standard e.g. in the case of cable TV, home computer etc.. Fine tuning could also be stored in the TV’s memory Display: a small illuminate display in the upper right-hand corner of the screen provided clear responses to almost all orders received from the Terminal Log Line speaker system: a special principle that ensured perfect, lifelike sound reproduction in very compact speakers. The power output was 7 watts sine Stereo-width adjustment: creating the illusion of increased distance between the speakers and providing a wider, fuller sound image Enhanced mono broadcasts: the special stereo-width circuit also improved the sound quality of mono broadcasts Teletext decoder: an optional extra which with a couple of touches on the Terminal gives direct access to the latest news, TV listings, weather forecasts, sports results and so on Built-in clock: during Teletext broadcasts, the correct time can be called on to the screen. This was shown discreetly in the upper right-hand corner On top of this was a wealth of connection options. Beovision MX2000 was awarded the Danish Design Centre’s IP Prize in 1986.

Posted on

BeoVision MX 3000

BeoVision MX 3000

The prize-winning MX series was a winner in more ways than one. Quite apart from its stunning looks, it was packed with Bang & Olufsen technology to give you breathtaking picture quality. The MX3000 had a 51cm flat-square picture tube, giving you a great view from almost any angle. It wouldn’t fade away in strong sunlight either, thanks to the contrast screen which kept the picture bright and clear. And, with automatic colour tuning 50 times per second, the colours were always natural and true to life.

Pure sound
A superb picture needs top-quality sound. You obtained both with the MX series. The special Log Line speaker system gave you extraordinary lifelike sound reproduction from very compact speakers. Your stereo videos gained an extra dimension from the stereo width adjustment, which provided a wider, fuller sound image. And to receive stereo TV broadcasts, all you’ll need to do is install a NICAM decoder. There’s good news if you’re planning a round-the-house TV, video and music system too – the MX3000 could team up easily, and also gave you an extra pair of speakers on demand.

Reach for the stars
Are you planning to receive the myriad of entertainment options which satellite TV will eventually offer? Just add Bang & Olufsen’s parabolic ‘dish’ antenna and the MX3000 is all set. You’ll also find the digital search and fine-tuning system invaluable when so many TV stations are competing for your attention. The system was first introduced on the L and LX TVs; working on the same principle as an electronic tune radio, it was a great success.

One remote control, multiple connections
If you add to your Bang & Olufsen TV with a B&O VCR, or broaden your horizons and go for the complete round-the-house system, you’ll still need just the one neat remote control. The Beolink 1000 remote control unit talks to tape recorders just as easily as it does to video recorders. You won’t be short of connections either – the MX3000 can accommodate a personal computer, video games, headphones and a loop amplifier for the hard of hearing.

Posted on

BeoVision MX 5500

BeoVision MX 5500

Beovision MX 5500 was perhaps Bang & Olufsen’s most elegant high-format TV according to the 1990 catalogue. The screen was exactly the same size as other 66cm television screens, but the stereo loudspeakers were located underneath, creating a completely different look. Also, the flat design and polished surfaces in clear colours helped make this big TV seem light and elegant.

From your armchair, the whole TV could be rotated 35 degrees to either side with lust a press of the Beolink 1000 terminal. And, when you had Beocord VX 5000 video tape recorder working in conjunction with it, the MX 5500 opened up a world of technological sophistication that literally, needed to be seen to be believed.

Whatever stereo system you used, Beovision MX 5500 had stereo decoders that allowed it to do full justice to the most exquisite music track. It shifted from system to system automatically; you didn’t even need to think about it. You could also use Beocord VX 5000 video recorder to record and playback 4 hours of stereo sound and picture or up to 8 hours of stereo sound alone.

Beovision MX 5500 contained the sum total of Bang & Olufsen’s expertise in sound and picture technology. As well as giving razor-sharp pictures and totally natural colours, room was left for a satellite receiver module. And naturally, there were connections options for extra loudspeakers, computers, decoders, headphones, amplifier loop, TV games and a whole host more.

The slim, beautiful Beocord VX 5000 video recorder was carefully designed to match the Beovision MX 5500 TV.