Posted on

LC1 Light Controller

LC1 Light Controller

A part of the Bang & Olufsen complete home entertainment solution is the light control system which allows for the adjustment of light-settings of a single lamp, room or entire house with a Beolink® remote control.

You can also program local and global light-settings so that when you press ‘LIGHT’ and ‘1’ on the relevant remote control all the lights in the room adjust to their preset lux-settings which are stored in memory-location ‘1’. Nine local light settings can be stored with the dimming of each light unit being made individually.

Each light which should be included in the light programming must have an LC2 unit (the latest device) attached to them. It’s a small white, slim box with a dark glass ‘eye’ in the middle (see below). The ‘eye’ also operates as a tactile on/off switch – by touching it the light turns on or off; by keeping a finger on it the light dims upwards and downwards gradually.

The light-control units were also timer-programmable through two-way communication with the audio master (Beosystem or Beocenter) acting as the timer-host. In this way you could set the lights to dim when, for example your favourite TV-series began and the Beovision TV turned on! Unfortunately, since the demise of two-way communication in the mid-1990s this is no longer possible.

LC1 Light control module (1989-1992)

With the LC1 light control unit it became possible to regulate lighting levels and distribution using a Beolink 1000 terminal. The Mk3a Beolink 1000 was the first terminal to include a ‘Light’ key, and this, in conjunction with the volume keys, set the light level. Up to nine LC1 light controls could be used in one room, using the number keys on the Beolink 1000. LC1 light controls could also be preset at a number of different intensities, so that different ‘light pictures’ could be called up quickly and easily. The LC1 also had a sensi-touch area on its top surface in order that the connected light could be switched on and off manually.

Other remote control terminals that controlled the LC1 were Beolink 5000, 7000 and Beo4. Master Control Panels 5000, 5500 and 6500 did not include a light function.

Posted on

Control Center VTR

Bang & Olufsen BeoCord VX7000

The Control Center VTR was a special version of the Beocord VX 7000. It fitted neatly and unobtrusively in the AV 9000 Control Center and provided similar functionality to that offered by the VX 7000. There were a few differences though. Firstly, the tape transport keys were replaced by two sensi-touch fields, one for rewind and one for eject. Secondly (and inexplicably), the “track” mode had been removed from the digital display on the front of the machine.

The Control Center VTR was uprated alongside the Beocord VX 7000, and in particular was modified to use the Beo 4 remote control when this became available.

The Control Center VTR was withdrawn alongside the rest of the Beosystem AV 9000. The AV 9000 was replaced by the Beovision Avant, which was fitted with an integrated video recorder, so a new version of the Control Center VTR was not necessary.

Posted on

BeoVision MX 3500

BeoVision MX 3500

Beovision MX 3500 appeared so light that to think of it hanging on the wall would have been quite logical. In fact, like other MX TVs, it could (and still can) be done. TV could then be watched from any angle; the set could be turned horizontally and adjusted vertically. You could also place the MX 3500 directly onto the floor. Or on one of the specially designed stands, which fully complimented such a handsome TV.

Beovision 3500 was born with perfect razor-sharp pictures colours and automatic contrast regulation. As well as quick-search Teletext. And stereo decoders that let you receive concerts in the finest stereo sound, regardless of the stereo system transmitted.

As with every Bang & Olufsen TV, you could connect Beovision 3500 to video recorders, extra loudspeakers, headphones, decoders, personal computers, TV games consoles and amplifier loops for those with hearing impairment. And if you wanted, you could also have Bang & Olufsen’s satellite receiver built into the cabinet.

You could choose from five different, clear colours for Beovision MX 3500; from the outright daring to the highly discreet.

Posted on

BeoVision MX 4000

BeoVision MX 4000

The MX range was the first to bring the TV out into the open and it continues to show alternative ways of living with television. Beovision MX4000 was the little brother of the MX6000 having the same functions but with some minor differences when it came to sound and picture. The speaker was not a 2-way bass reflex as in the MX6000 but a 2-way Logline speaker.

Complete with a choice of colours, the specially-designed wall brackets of the MX 4000/4002 gave you the option of placing the MX on the wall. The placement options of the MX 4000/4002 also included a motorised stand with room for your VCR/DVD player.

The TV had a 51cm screen, the same features as MX 6000, but with conventional loudspeakers, optional wall bracket, available in pearlescent shades of: green, blue, red, grey, black or glossy white. With a Beovision MX 4002 as an extra TV in the bedroom, you could access the video and satellite options of the Avant in the living room or wake up to music from the radio and CD of the Ouverture or BeoSound 3000. Beovision MX4002 was replaced with the MX4200 in 2003.

Beovision MX 4000 was the smallest television of Bang & Olufsen televisions in the late 1990s and right up to 2003. It had a 51cm screen, and was equipped with the latest generation of the Black Line picture tube, contrast screen and VisionClear technology. Together they provided an optimum picture quality under any lighting conditions – even when faced with direct sunshine. In spite of their modest size, the log-line loudspeakers located under the screen gave full-tone stereo with great depth and amplitude. MX 4000 had both A2 and NICAM Stereo decoders and Teletext-functions.

Beovision MX 4000 was probably the most flexible television as far as placing was concerned. You could place it directly on a floor, and using the spring bar underneath the set you could tilt it in order to improve viewing angle. You could place the MX 4000 on the wall with an optional bracket, which also came as a motorised version. When on the wall, you could tilt the screen downwards, towards a bed, for example. Or you could of course place the TV on a stand on the floor, or on a stand on a table. Both stands were available in motorised versions and the floor-stand had an optional video-shelf available. The motorised stand was operated via the Beolink® remote control, that also operated the television and video (shown) as well as all B&O audio systems and light control units.

Beovision MX 4000 was a great addition to a multi-room Beolink® system, where it acted as one link itself and could play audio from the audio system that was located elsewhere in your home. And on the other hand, you could direct the sound from the television to the speakers of your audio system.

It had the same beautiful, sleek and modern design as all other Beovision televisions; the design of which has even been compared to sports cars!

MX Design

Filling a television with every conceivable gadget that technology offers is easy enough. What’s more difficult is identifying what really improves the overall experience of watching TV and eliminating the things that don’t. That’s the philosophy behind the MX range. In both form and function, it’s a clear-cut case of less being more.

Complete with a choice of 6 colours that included green and white, the specially-designed wall brackets of the MX 4000 gave you the option of placing your MX on the wall. The placement options of the MX 4000 also included a motorised stand with room for your VCR/DVD player. The TV was controlled by the provided Beo4 remote control.

Beolink® – Beovision MX 4002

Beovision MX 4002 was the Beolink® variation of the MX 4000. This model gave you numerous options when you were setting up your Beolink® system and needed an extra television in your bedroom, study or kitchen. The MX 4002 was available in the same colours as MX 4000 and had the same placement possibilities as well.

** Beovision 4000/4002 at the time of its introduction, was fitted with a plexi-glass (acrylic) screen. However, since the late 1990’s, the model has a glass screen, the same as the rest of the model range.

Posted on

BeoVision MX 5000

BeoVision MX 5000

Beovision MX5000 marked a high-point in the development of the MX series of televisions. The MX5000 was a fully-fledged 66cm TV, housing everything that technology had to offer in the area of TV pictures and sound.

The television had a 66cm flat-square picture tube, together with automatic adjustment of the colour balance 50 times every second, so you always obtained a crystal clear picture in lifelike colours. The set could also cope easily with variable light conditions thanks to the built-in contrast screen.

Beovision MX5000 also offered a unique feature in operating comfort – a motorised swivel platform which was operated by the same Beolink 1000 remote control as the television. The whole set could be turned 35 degrees either side for better viewing. And when you turned off the set, it automatically returned to the centre position. This was the first Bang & Olufsen TV set to employ a motorised base/stand.

Beovision MX5000 was designed specially be use in conjunction with Beocord VX5000 video recorder when, together, you could pull in a live picture from another channel on the screen while you continued with the programme you were already watching. Very handy when you were waiting for a specific programme on another channel to start. Much the same could be done in later years with the advent of Picture-in-Picture – a module bought as an accessory for fitting into your television.

Like all of Bang & Olufsen’s TV range at the time that Beovision MX5000 was produced, you could also have a NICAM decoder installed for the reception of stereo TV broadcasts. It came prepared with a Teletext decoder fitted with the four most-used pages stored in memory so that you could call them onto the screen very quickly. The MX5000 also automatically chose the right Teletext alphabet when you switched to a foreign TV station.

Another feature was that of satellite broadcasts in that you could have a Beosat RX satellite receiver connected to the television in order to receive satellite television programmes. The Beosat RX unit fitted snugly under the set in much the same way as the Beocord VX5000 video recorder.

Beovision MX5000 won I.D. magazine’s I.D. Award for its design in 1990.

Beovision MX5000 US

Bang & Olufsen’s first television in the the US market was a variant, the MX 5000 US. But, because of sales factors and market conditions at the time, it was not a great success.

Posted on

BeoVision MX 5500

BeoVision MX 5500

Beovision MX 5500 was perhaps Bang & Olufsen’s most elegant high-format TV according to the 1990 catalogue. The screen was exactly the same size as other 66cm television screens, but the stereo loudspeakers were located underneath, creating a completely different look. Also, the flat design and polished surfaces in clear colours helped make this big TV seem light and elegant.

From your armchair, the whole TV could be rotated 35 degrees to either side with lust a press of the Beolink 1000 terminal. And, when you had Beocord VX 5000 video tape recorder working in conjunction with it, the MX 5500 opened up a world of technological sophistication that literally, needed to be seen to be believed.

Whatever stereo system you used, Beovision MX 5500 had stereo decoders that allowed it to do full justice to the most exquisite music track. It shifted from system to system automatically; you didn’t even need to think about it. You could also use Beocord VX 5000 video recorder to record and playback 4 hours of stereo sound and picture or up to 8 hours of stereo sound alone.

Beovision MX 5500 contained the sum total of Bang & Olufsen’s expertise in sound and picture technology. As well as giving razor-sharp pictures and totally natural colours, room was left for a satellite receiver module. And naturally, there were connections options for extra loudspeakers, computers, decoders, headphones, amplifier loop, TV games and a whole host more.

The slim, beautiful Beocord VX 5000 video recorder was carefully designed to match the Beovision MX 5500 TV.

Posted on

BeoVision MX 6000

BeoVision MX 6000

Beovision MX6000 delivers the same uncompromising picture quality as the MX 7000. The only difference is the loudspeaker system which has conventional amplification using built-in passive speakers.

The MX television range was the first to bring the TV out into the open and it continues to show alternative ways of living with television. With the current MX range, the TV finally becomes a discreet part of your interior decoration. Choose between a 51cm or 66cm screen, 6 different colours and a versatile range of stands and brackets – with or without motorised turning. What comes as standard however, is an uncompromising sound and picture quality that has set the reference for modern television.

The Beovision MX series has become a classic. Designed by David Lewis in the 1980s, this television set has gradually developed through the years to become the most well-known TV in the world today. Much has happened however, since the first version. Today the Beovision MX6000 is equipped with the latest in picture and sound technology. This is the first, and probably only, TV with an built-in active speaker system. By using the same technology as used in all their stand alone active speakers, Bang & Olufsen have managed to provide sound quality that is hard to believe. The MX6000 is really the same machine as the MX7000 but without the active speakers. It features a passive system instead.

When it comes to the picture, the current version features a 28 inch BlackLine S CRT along with the contrast screen and the other VisionClear components. The MX series can, of course, be equipped with built in satellite receiver/Positioner and a Picture-In-Picture (PIP) module. For those wishing to use the Teletext subtitles when a programme is using them the MX sets automatically turns them on and, in conjunction with a Beocord VX7000, it can also record a TV programme with subtitles. All versions can be connected to the motor stands giving the possibility to adjust the viewing angle remotely.

With two colours and five placement options to choose from, the MX 6000 will suit almost any purpose and room environment. The Beovision MX6000 is basically an MX7000, but with a conventional speaker system instead of active loudspeakers.

Design
Filling a television with every conceivable gadget that technology offers is easy enough. What’s more difficult is identifying what really improves the overall experience of watching TV and eliminating the things that don’t. That’s the philosophy behind the MX range. In both form and function, it’s a clear-cut case of less being more.

Features
With 2 colours and 5 placement options to choose from, the MX 6000 will suit almost any purpose. Optional brackets are available; Beovision MX6000 is available in glossy black and glossy white only. The TV is controlled by the provided Beo4 remote control. It is a 66cm TV with VisionClear; stereo loudspeakers; improved Teletext; Beo4 remote control; connections for Beolink® VCR and headphones; BeoStand and motorised stands are optional.

Posted on

BeoVision MX 7000

BeoVision MX 7000

The MX range was the first to bring the TV out into the open and it continues to show alternative ways of living with television. Beovision MX7000 was Bang & Olufsen’s first television set designed with active speakers.

Beovision MX 7000 comes with the same Active loudspeakers technology that’s found in the BeoLab range of loudspeakers. By building the amplifiers directly into the speaker cabinet we’re able to ensure a sound performance that’s second to none. With the MX 7000 you have a full range of 6 colours and 5 placement options. Whether you prefer blue to red or a motorised stand to a non-motorised stand, the MX 7000 will give you a number of possibilities: 66cm screen with VisionClear, active loudspeakers, improved Teletext, Beo4 remote control, connections for Beolink®, VCR and headphones, optional module for satellite, BeoStands and motorised stands and available in pearlescent shades of: blue, green, red, grey, black or glossy white.

The Beovision MX series has become a classic. Designed by the famous David Lewis in the ’80s, this television set has gradually developed through the years to become the most known TV in the world today. Much has happened, however, since the first version. Today the MX7000 is equipped with the latest in picture and sound technology. This is the first, and probably only, TV with an built-in active speaker system. By using the same technology as used in all their stand alone active speakers, Bang & Olufsen have managed to provide sound quality that is hard to believe. The MX6000 is really the same machine as the MX7000 but without the active speakers. It features a passive system instead. When it comes to the picture, the current version features a 28 inch Backline S CRT along with the contrast screen and the other VisionClear components.

The MX series can, of course, be equipped with built in satellite receiver/Positioner and a Picture-In-Picture (PIP) module. For those wishing to use the Teletext subtitles when a program is using them the MX sets automatically turns them on and, in conjunction with a Beocord VX7000, it can also record a program with subtitles. All versions can be connected to the motor stands giving the possibility to adjust the viewing angle remotely. The MX7000 is available in the same colours as the Avant, namely pearly red, blue, black, green and grey.

With the MX range, the TV finally becomes a discreet part of your interior decoration. Choose between a 51cm or 66cm screen, 6 different colours and a versatile range of stands and brackets – with or without motorised turning. What comes as standard, however, is an uncompromising sound and picture quality that has set the reference for modern television.

Design
Filling a television with every conceivable gadget that technology offers is easy enough. What’s more difficult is identifying what really improves the overall experience of watching TV and eliminating the things that don’t. That’s the philosophy behind the MX range. In both form and function, it’s a clear-cut case of less being more. Beovision MX 7000 is controlled by the Beo4 remote control.

Beovision MX 7000
With the MX 7000 you have a full range of 6 colours and 5 placement options. Whether you prefer blue to red or a motorised stand to a non-motorised stand, the MX 7000 will give you a number of possibilities.

Bang & Olufsen have a long lasting commitment to the principle of Active Loudspeakers, i.e. the idea that each loudspeaker unit is powered by an individual amplifier with a specific crossover network, to ensure perfectly natural sound reproduction. The principle has definite advantages in the field of television sound.

Despite critical operating conditions, Beovision products succeed in providing sonic performances which surpass those of many hi-fi systems. The active loudspeakers in Beovision Avant, for instance, reproduce a sound quality equal to a pair of BeoLab 2500s.

And if your demands exceed those of the average viewer, the speakers’ modularity allows you to enhance the sound performance with any choice of loudspeakers in the BeoLab range.

In October 2002, Beovision MX7000 was replaced with Beovision MX8000.

Posted on

BeoVision L 4500

BeoVision L 4500

Beovision L 5500 / 4500 – Alternative theatre

A classic Bang & Olufsen TV has always been a good investment. However, if you didn’t need the advanced features that Beovision LX had to offer, the alternative TV was the ‘L’ range. It offered same design, same engineering, same quality, but different pricing and different colours.