Posted on Leave a comment

BeoLink Video

BeoLink Video

This kit is designed to allow a Beovision to be used in a link room but have full access to the sources, both audio and video, in the main room.

It attached to the link TV by means of a 7 pin cable and had no IR receiver as it utilised that in the TV. A separate RF cable was required between the RF modulator on the main room set and the link TV.

Posted on Leave a comment

BeoLink Converter

BeoLink Converter

This product allows the use of audio and video products with Audio Aux (Datalink) in a ML system.

It has a clever auto configuration feature which means it sets itself up depending on the connected units. Uses can be to connect an older audio set up such as a Beomaster 7000 to a newer video set up such as an Avant or a newer audio set up to an older TV.

It has a supplementary use in that it could be used with a Beocenter 2300/2500 which were fitted with MCL drivers to power an ML system. This requires the Converter to be of the newer type : 1161166. the older 1161466 is unable to perform this function.

Posted on

BeoLink Active

BeoLink Active

This comprises a control box, an IR receiver and a mains lead.

This allowed the connection of active BeoLab speakers which would then have independent control of volume and tone settings. Both audio and video sources could be selected and there was also the option of using the Beolink receiver to enable the Timer, alter the volume and enable play or initiate Stand By.