This receiver was a development of the Beomaster 2000 but as well as being quadraphonic, was FM only. The tuning scale was extremely unusual being a series of vertical scales rather than a single horizontal one. Despite the huge length thus provided, it still only read up to 104!
It was designed to be partnered by the Beogram 3400 which could provide the correct 4 channel input as well as the stereo cassette player, the Beocord 2200. S45 or P45 speakers made up the rest of the system.
Sound system and loudspeakers: stereo and quadro or two sets of stereo Features: 4 channels FM pre-tuning: 5 stations Muting: FM Yes Loudness: Yes
Power output at specified distortion: 1000 Hz RMS 2 x 30, 4 x 20 watts / 4 ohms 2 x 20, 4 x 16 watts / 8 ohms Music power: 2 x 40, 4 x 40 watts / 4 ohms 2 x 23, 4 x 23 watts / 8 ohms Speaker impedance: 4 ohms
Harmonic distortion 1000 Hz 50 mV DIN 45500: < 0.06 % Intermodulation DIN 45,500: < 0.3 %
Bass control at 40 Hz: +/- 17 dB Treble control at 12500 Hz: +/- 14 dB
FM tuner: 87.5 – 104 MHz Sensitivity: 26 dB, +/- 40 kHz < 1.5 µV / 75 ohms Signal-to-noise ratio: DIN 45500 > 65 dB
Power supply: 110 – 130 – 220 – 240 V Power consumption 20 – 250 W Dimensions W x H x D: 68.5 x 7.5 x 27cm Weight: 8.2 kg
Connections: Headphone Max. 8 V / 200 ohms Tape: 2 sockets output 15 mV / 20 k ohms DIN Speakers: 2 set Aerial FM: 75 ohms Phono: DIN
Gold or Silver membership required to view documents
Available documents are listed, if none are listed then please reach out to see if we have them.