Beomaster 1000 – a compact all-transistor hi-fi 2 x 15 watt stereo amplifier equipped with a highly selective FL radio with extended FM band (to 108 MHz), 3-gang tuning capacitor and 4-stage intermediate-frequency amplifier, automatic control circuit which locks on FM stations and keeps them accurately tuned.
It is prepared for single-transmitter stereo broadcasts, having a B&O multiplex adaptor (stereo decoder); it is also equipped with a pilot lamp (“Beo-Beacon”) which lights up when the receiver is tuned to a station transmitting an FM stereo programme.
The stereo amplifier, which plays both stereo and mono gramophone records, delivers no less than 2 x 15 watts of power output; piano-key speaker change-over switches which control two sets of stereo speaker systems, separate extra-efficient bass and treble controls; balance control for correct stereo sound distribution; physiologically compensated volume control (provides full balance at all volume levels throughout the tonal range); separate scratch and rumble filters; piano-key switching between mono and stereo reproduction; piano-key selectors for switching between the following types of operation: FM Broadcasting, FM Automatic Frequency Control; Tape Recorder; Gramophone 1; Gramophone 2.
Dimensions: 87mm high, 505mm wide, 24mm deep.
Choice of teak or Brazilian rosewood finish. Awarded the 1966 iF Prize for Industrial Design”
Power output: 2 x 15 W continuous
2 x 20 W music power
Frequency range 30 – 25,000 Hz- +/- 2 dB
Distortion <1% at 40 Hz – 1 kHz – 12.5 kHz / 15 W
Tone controls:
Bass control: + 10 dB – 17 dB at 60 Hz
Treble control: + 12 dB – 16 dB at 12.5 kHz
Built-in stereo decoder Only type 2317
Wave bands:
FM 88 – 108 MHZ
RIAA amplifier: Built-in
Voltage: 110 – 130 – 220 – 240 V
Power consumption 20 – 120 W
Dimensions H x W x D: 9 x 51 x 24cm
Weight 5.5 kg
Connections: Gramophone 1
Gramophone 2
Tape
Aerial
Speakers 2 sets
Available documents are listed, if none are listed then please reach out to see if we have them.
Please let us know