BeoVision 10-32 LCD Television

Large photo

Manufactured: 2010 - present
Designer: David Lewis
Colours: Silver and black

Room for a View

The third set in the ever expanding BeoVision 10 range, this set was designed primarily as a link room set. It shared the thin profile and design of the other sets in the series but lacked the surround sound module of the bigger sets. It was possible to attach both a sub-woofer and two front speakers though these reverted to the system seen many years earlier in the LX and MX sets of utilising a centre balance system.

In common with the BV10-40, an LED edge backlight system was used though the screen itself was a 100Hz device.

Sound was catered for by two way active speakers for each channel though the innovative bass woofer box seen on the 40" and 46" models was no longer present. Interestingly a similar frequency response of 85-20-000Hz was claimed.

A DVB module was an option and the same facilities for switching off the analogue tuner were present on this model as its larger brother.

Connections were comprehensive with 3 HDMI sockets being standard with the third able to be attached to an expander.

Mounting Options

Bang & Olufsen stands available at launch included Motor Table Stand, Motor Floor Stand and a simple Wall Bracket using the hinged device seen previously to position the rear of the TV close to the wall.

BeoVision 10-32 LCD Television Product Specifications

Dimensions


W x H x D
81.4 x 74.2 x 6.4 cm

Weight
27 kg

Dimensions
W x H x D
Including close to wall bracket
81.4 x 74.2 x 6.9 cm

Dimensions
W x H x D
Including side wall bracket
81.4 x 74.2 x 6.8 cm

Dimensions
W x H x D
Including table stand
81.4 x 82.3 x 40.6 cm

Dimensions
W x H x D
Including floor stand
81.4 x 97.5 x 40.6 cm

Chassis type
C3

Cabinet finish
Optional black or white

Frame: Silver

Colour variants front cloth
Blue, black, dark grey, orange, silver, white

Mains voltage range
100-264 V AC
47-63 Hz

Power consumption
On mode 115 W
Standby with system module enabled 0.7 W
Standby with system module disabled 0.5 W


Remote Control (not included)
Beo4, type 1710
Beo5, type 1682

Diagonal picture size
32" 16:9 TFT LCD

Aspect ratio
16:9

Contrast ratio
Typical 5000:1

Pixel Count
2.1 million

Resolution
1920 x 1080 pixels (Full HD)

Display colours
16.7 million

Peak luminance ratio
65%

Luminance of white
Typical 450 cd/m2

Response time
Typical 6 msec.

Contrast screen
Optional
Anti-reflection on both sides

Backlight
Edge-type LED backlight, Global backlight dimming

Refresh rate
100Hz/120Hz

Formats
Format 1: 16:9 Panorama - 15:9
Panorama - 4:3
Format 2: Letterbox + Soft scroll
Format 3: 16:9
Automatic format optimisation via "Black Bar Detection"
16:9 detection on all Scart connectors
Support of WSS (Wide Screen Signalling) from broadcaster
Format 4: The bars can be removed and the picture is shown in a 16:9 format

Viewing comfort
Typical +/-89 degrees both vertically and horizontally

VisionClear
Yes

Menu languages
English, Danish, Dutch, Spanish, Italian, German, French, Swedish

Analogue tuner
Not for US market

Teletext
Teletext level 1.5, 2000 pages
Teletext and picture, 9 memory pages, WSS

Tuning on analogue signals
48-862 MHz
99 programmes, auto-tune, programme move and automatic naming

TV system on analogue signals

According to type and setup
B/G/L/L’/D/K, PAL and SECAM

Frequency range
45-860 MHz VHF, S-band, Hyper-band, UHF 99 programmes, auto tune, programme move and automatic naming

Stereo decoding capabilities on analogue signals
A2 + Nicam

Digital tuner DVB-T/C
Optional
Not for US market

Video format
Mpeg2 (MP@ML, MP@HL), H264 (Mpeg4)

Audio format
Mpeg1, Mpeg2, AAC, AAC+ and AC3 decoding and downmix

Frequency, range and IF bandwidth
110-862 MHz (Band 3, 4, 5) IF bandwidth 6, 7 & 8 MHz selectable
Auto tuning 174-230 MHz and 470-858 MHz
Common interface and smart card slots
Common Interface according to EN50221

1x PCMCIA (Common Interface only)
Embedded CA: Conax (without Chip and Card pairing),
1 Smart card slot connector
All CA systems available as common interface are supported
CA power supply: 5 V/500 mA max.

Digital tuner DVB-T/C/S2
Optional
Not for US market

Video format
Mpeg2 (MP@ML, MP@HL), H264 (Mpeg4)

Audio format
Mpeg1, Mpeg2, AAC, AAC+ and AC3 decoding and downmix

Frequency, range and IF bandwidth
S/S2: 10700-12750 MHz, IF Bandwidth 950-2150 MHz
T/C: 110-862 MHz (Band 3, 4, 5) IF Bandwidth 6, 7 & 8 MHz selectable
Auto tuning 174-230MHz and 470-858MHz
Raster
Special requirements for France, Italy, Taiwan and Australia
Cofdm (coded orthogonal freq. division modulation) spectrum

2K & 8K, hierarchical and non-hierarchical
Modulation

Terrestrial : QPSK, 16QAM, 64QAM
Satellite : QPSK
Satellite S2 : 8PSK, QPSK
Code rate

1/2, 2/3, 3/4, 5/6, 7/8
Guard interval

1/32, 1/16, 1/8, ¼
Symbol rate

2-45 Msymb/sec
Odu control

DiSEqC 1.1
Common interface and smart card slots

Common Interface according to EN50221
1x PCMCIA (Common Interface only)
Embedded CA: Conax (without Chip and Card pairing),
1 SmartCard slot connector
All CA systems available as common interface are supported
CA power supply: 5V /500 mA max.

Loudspeakers:

Types
Integrated stereo speakers

Power amplifier modules
20 W

Frequency range
85-20,000 Hz

Cabinet principle/ net volume
Closed box 0.5l

Woofer
None

Midrange
58 mm

Tweeter
19 mm

Bass equalizer
Adaptive Bass Linearization (ABL)

Magnetic shielded
None

System modulator:
Not for US market

Video distribution
BeoLink video distribution (system modulator output to link room) via RF

Frequency range
According to setup: G or I or M RF output
- Video frequency range: 471.71-855.25 MHz (in 1 MHz steps) dual side band
- Audio frequency range:
- System G: 5.5 MHz (system can be set in Service Menu)
- System I: 6 MHz (system can be set in Service Menu)
- System M: 4.5 MHz (system can be set in Service Menu)

Audio
Stereo audio distribution via Master Link

Peripheral Unit/Set-top Box Controller:

Controlling boxes with Beo4
Maximum control of 4 boxes

HDMI Inputs
3 X HDMI

Formats
480p,576p, 600p, 768p, 576i, 480i, 720p, 1080p,1080i

Created: 30th October 2010
Modified: 19th February 2019

Author Notes:

My BeoWorld



0 items in your basket

Need a cable? Just ask Steve at Sounds Heavenly
Want to sell your B&O products